Loan Term vs. Amortization Period
Loan Term vs. Amortization Period, in short
The loan term is when the loan is due; the amortization period is the schedule that sets your payment. A $1,400,000 loan at 6.5% with a 10-year term and 25-year amortization has a $9,453 monthly payment, but $1,085,159 is still owed at year 10, when you must refinance, sell or pay it off.
Also called term vs. amortizationloan term and amortization schedule10/25 loanballoon structure
What the two terms mean
Two different clocks run on a commercial real estate loan, and the loan documents set each one separately.
- Loan term is the contract. It runs from closing to the maturity date, and on that date the entire unpaid balance, accrued interest and fees are due. It also usually defines how long the rate is fixed and how long prepayment costs apply.
- Amortization period is the math. It is the number of years over which the monthly payment is calculated so that principal and interest would be fully repaid if the loan ran that long. It does not appear on a calendar; it only sets the size of the payment and how fast the balance falls.
When the amortization period is longer than the term, the loan is a balloon loan: you pay on a long schedule, and the leftover balance is due at the end of a shorter term. Lenders write this as two numbers, for example “10-year term, 25-year amortization,” sometimes shortened to “10/25.” When both are the same, the loan fully amortizes and ends at zero.
Monthly payment = Loan × r ÷ (1 − (1 + r)−n), where r is the annual rate ÷ 12 and n is the amortization period in months
Notice that the term does not appear in the payment formula. Change the term from 5 years to 10 and the payment is identical. Change the amortization from 25 years to 30 and the payment falls, whatever the term is. The term only decides on which month of the schedule the bill for the remaining balance arrives.
Worked example: same loan, four amortization periods
A property is bought for $2,000,000 with 30% down, so the loan is $1,400,000. The rate is 6.5%, an example and not a current quote, and the term is 10 years. The figures below use the same arithmetic as the commercial mortgage calculator.
| Amortization | Monthly payment | Annual payment | Balance at year 10 (balloon) | Balloon as share of loan |
|---|---|---|---|---|
| 15 years | $12,196 | $146,346 | $623,296 | about 45% |
| 20 years | $10,438 | $125,256 | $919,261 | about 66% |
| 25 years | $9,453 | $113,435 | $1,085,159 | about 78% |
| 30 years | $8,849 | $106,187 | $1,186,866 | about 85% |
Read across the 25- and 30-year rows. Moving from 25 to 30 years of amortization saves $604 a month, about $7,248 a year. It also adds $101,707 to the balloon. Over the 10-year term you pay roughly $819,500 in interest on the 25-year schedule and roughly $848,700 on the 30-year schedule, and you owe more at the end. A longer amortization is a loan from your future self: lower cash outflow now, a bigger number to refinance later.
Now hold the amortization at 25 years and change only the term. At 5 years, the balloon is $1,267,870. At 7 years it is $1,201,801. At 10 years it is $1,085,159. At 25 years it is $0, because the term has caught up with the schedule. The payment is $9,453 in every case. The term is the lever on when you face the balloon and how much of today's market you are betting on at that moment, and the amortization is the lever on how large it is.
Why commercial loans split the two
A consumer 30-year mortgage has a 30-year term and a 30-year amortization, so the two are easy to confuse. Commercial lenders separate them for reasons that go back to how they fund and price the loans.
- Reassessment. A 5- or 10-year term lets the lender look at the property, the borrower and the rate again at maturity instead of holding the same terms for 25 or 30 years.
- Affordable payment. Commercial property has to cover its own debt service from rental income. A long amortization keeps the payment low enough to pass the coverage test.
- Different buyers. A conduit loan sold into a CMBS pool or sold to an agency is priced for a specific investor horizon, usually 5 to 10 years, even though the schedule is 25 to 30 years.
Our typical ranges: a bank commercial loan runs 5–10 yr on a 20–30 yr schedule; a CMBS loan runs 5–10 yr on 25–30 yr; permanent financing runs 5–30 yr on 20–30 yr. Short-term products such as bridge loans (typically 12–36 mo) are usually interest-only and have no amortization schedule at all, which is a third structure covered below.
Fannie Mae's published multifamily term sheet shows how wide the range can be: terms of 5 to 30 years, with amortization of up to 30 years. Freddie Mac's Optigo fixed-rate term sheet likewise allows amortization of up to 30 years.
Why lenders care
Lenders look at term and amortization for different reasons, and a borrower who understands both can predict which number a lender will push on.
- Amortization drives sizing. The annual payment on the amortization schedule is the debt service in the debt service coverage ratio. At a 1.25x minimum, the $1,400,000 loan above needs net operating income of about $141,794 on a 25-year schedule ($113,435 × 1.25) and about $132,734 on a 30-year schedule ($106,187 × 1.25). That is $9,060 less income to qualify, which is why borrowers ask for the longer schedule. The loan constant is the same idea expressed as a single percentage.
- Term drives risk and pricing. A longer term gives the lender a longer period to be wrong about the property, and it sets how long the rate is fixed and how long prepayment costs apply. Quotes for different terms can carry different rates, so compare the same amortization at each term.
- The balloon drives refinance risk. The lender knows the balloon has to be paid from a new loan, and so should you. A 10/30 loan leaves about 85% of the original principal outstanding, which makes the borrower more exposed to higher rates or a lower value at maturity. See maturity date for the refinance tests a new lender will apply.
- Debt yield ignores both. Debt yield divides net operating income by the loan balance, so stretching the amortization does nothing for a loan that is limited by it.
Term vs. amortization vs. interest-only
A third variable often sits inside the term. An interest-only period is the early part of the term when you pay interest and no principal. It changes the balloon, not the term and not the amortization schedule, which usually starts when interest-only ends.
On the same $1,400,000 loan at 6.5%, interest-only costs $7,583 a month. Suppose a 10-year term has 3 years of interest-only, and the 25-year amortization starts when interest-only ends. The balance at year 10 is $1,201,801 instead of $1,085,159, the same balance you would reach after 7 years of amortizing payments. If the 25-year schedule instead counted from closing, the payment after interest-only would be based on the remaining 22 years and would be higher. Ask whether the amortization period in your term sheet counts from closing or from the end of the interest-only period, because they produce different payments and balloons.
| Structure | Payment | Principal paid down | Balance at maturity |
|---|---|---|---|
| Fully amortizing (term = amortization) | Highest for a given schedule | All of it | $0 |
| Balloon (term < amortization) | Based on the amortization schedule | Part of it | Remaining balance |
| Interest-only for the full term | Lowest | None | The full loan amount |
Fixed term, repricing and the rate
On a fixed-rate loan the term usually matches the period the rate is locked. On a floating-rate loan the payment moves with the index while the amortization schedule and the maturity date stay the same, so the same schedule yields a different payment each time the rate changes. Some commercial loans also have a rate reset at year 5 or 7 inside a longer term; in that case the lender may recalculate the payment on the remaining amortization at the new rate. The term sheet should say which rate, which schedule and which date, because “10/25” alone does not.
Prepayment cost is tied to the term as well. Fixed-rate loans commonly charge a step-down percentage, yield maintenance or defeasance through most of the term and drop the cost in a short open period near maturity. A longer term therefore usually means a longer period during which exiting early is expensive. See prepayment penalty before you choose a term based only on the payment.
SBA loans: longer terms, split structures
SBA programs allow terms well beyond a conventional 10-year balloon loan. Under 13 CFR 120.212, an SBA 7(a) loan term must be the shortest appropriate term and 10 years or less, unless the loan finances or refinances real estate or equipment with a useful life over 10 years, with a maximum of 25 years including extensions. 7(a) loans run Up to 25 yr in our typical ranges.
An SBA 504 deal has two or more pieces. The CDC portion has its own long fixed term, while the bank's first-lien portion is a separate loan with its own term and amortization, and our SBA 504 page notes it can be shorter. Typical 504 terms are 10–25 yr, but a shorter bank piece can still leave a balance at its maturity. When you compare an SBA structure with a conventional one, line up each piece's term, amortization and maturity date, not just the blended payment. See also owner-occupied financing and SBA 7(a).
What to negotiate
- Choose the term from your business plan, not the payment. If you will hold the property for 12 years, a 5-year term gives you two refinance events and two rounds of closing costs. If you may sell in 4 years, a longer term can mean a prepayment cost at exit.
- Treat amortization as a payment decision with a balloon price tag. Ask for the payment and the balloon at 25 and at 30 years side by side before you pick.
- Ask for extension options. A one- or two-year option at a stated fee and conditions turns a hard maturity into a managed one. See the extension section in maturity date.
- Ask about the open prepayment window. The last months before maturity are often prepayable without a premium. Know the exact date.
- Confirm which payment the lender uses to qualify you. Ask whether coverage is calculated on the amortization payment in the term sheet or on a different assumption.
- Plan the exit at closing. Write down the maturity date, the balloon at that date and the value and net operating income you need to refinance it. The exit strategy belongs in the plan before the loan is signed, not at year 9.
If you want term and amortization options compared across lenders for a specific property, send us the details and we will show you the payment and balloon on each.
Common mistakes
- Reading “25-year” as the length of the loan. It is the schedule. Ask for the maturity date.
- Comparing offers by monthly payment alone. A lower payment from a longer amortization comes with a larger balloon. Compare the balance at maturity as well.
- Assuming the amortization starts at closing. With interest-only, it may start later, which raises the balloon.
- Forgetting that the rate may reset. The payment on a floating or resetting loan can change even though the schedule has not.
- Not testing the refinance. The balloon will be paid by a new loan sized on conditions at maturity. Test it at a higher rate and lower value than today. Our amortization guide and the balloon payment article walk through how the schedule and the leftover balance behave.
Sources: 13 CFR §120.212, “What limits are there on loan maturities?” (law.cornell.edu/cfr/text/13/120.212); Fannie Mae Multifamily, Fixed-Rate Mortgage Loans Term Sheet (multifamily.fanniemae.com); Freddie Mac Optigo Fixed-Rate Loans term sheet (mf.freddiemac.com). Example calculations use the site’s commercial mortgage calculator arithmetic; the 6.5% rate, the $2,000,000 purchase price and the 1.25x coverage minimum are illustrative assumptions, not quotes.
Frequently asked
What is the difference between loan term and amortization period?
The loan term is the length of the contract: the date the loan matures and the full unpaid balance is due. The amortization period is the number of years the payment is calculated over, as if the loan would be repaid on that schedule. A 10-year term on a 25-year amortization means you pay as though you had 25 years, but the lender expects repayment of what is left in year 10.
Why are commercial loan terms shorter than amortization periods?
The longer schedule keeps the monthly payment affordable and improves debt service coverage, while the shorter term lets the lender reprice or reassess the property and borrower at maturity instead of holding the risk for 25 or 30 years. The tradeoff is a balloon payment that the borrower has to refinance, sell or pay from cash.
Is a 25-year amortization the same as a 25-year loan?
No. A 25-year amortization only describes how the payment is figured. The loan can mature in 5, 7 or 10 years, and the remaining balance is due then. A true 25-year loan has a 25-year term as well; if the amortization is also 25 years, it is fully amortizing and the balance reaches zero at maturity.
Does a longer amortization period lower my payment?
Yes, but with diminishing returns and a cost. On a $1,400,000 loan at 6.5%, stretching amortization from 25 to 30 years lowers the payment from $9,453 to $8,849 a month, about $604 less. It also raises the balance due at the end of a 10-year term from $1,085,159 to $1,186,866, about $101,700 more.
Which one do lenders use to calculate debt service coverage?
Debt service coverage is calculated on the annual payment, and that payment comes from the amortization schedule, not from the term. A longer amortization lowers the payment, so the same net operating income covers a larger loan. Lenders set their own underwriting assumptions, so confirm which payment yours uses. Debt yield ignores both and looks only at net operating income and the loan balance.
How do SBA loan terms and amortization work?
The term of an SBA 7(a) loan is capped by regulation. Under 13 CFR 120.212, it must be 10 years or less unless the loan finances real estate or equipment with a useful life over 10 years, with a 25-year maximum including extensions. That long maximum is why SBA real estate loans can run far longer than a conventional 10-year term. Ask your lender for the term and the amortization of each part of the loan in writing.