Prime Rate
Prime Rate, in short
The Prime Rate is the benchmark U.S. banks use as the base for variable-rate business loans, lines of credit and SBA 7(a) loans. Banks set it 3 points above the top of the Federal Reserve's federal funds target range, so a 4.00% ceiling means a 7.00% Prime. At that 7.00% Prime, a loan priced at Prime + 2.75% on $1,400,000 over 25 years costs about $12,476 a month, and each 1-point move in Prime shifts that by roughly $990.
Also called WSJ Prime Ratebank prime loan rateprime lending ratePrime
How the Prime Rate works
The Prime Rate is a base lending rate. Each bank posts its own, but in practice the large banks post the same number, and published versions of Prime reflect what most of them charge. The Wall Street Journal's Prime Rate is defined as the base rate on corporate loans posted by at least 70% of the 10 largest U.S. banks. The Federal Reserve's H.15 release reports a bank prime loan rate, which it defines as the rate posted by a majority of the top 25 insured U.S.-chartered commercial banks, by domestic assets. Prime is one of several base rates banks use to price short-term business loans.
Prime is not set by the Federal Reserve, but it follows the Fed closely. Banks set it at 3 percentage points above the upper limit of the federal funds target range, and they move it by the same amount whenever the Federal Open Market Committee changes that range, normally within a day of the announcement.
Prime Rate = Top of the federal funds target range + 3.00%
After the Federal Reserve raised its target range to 3.75%–4.00% on September 16, 2026, the formula gave a Prime Rate of 7.00%. Our rate snapshot as of September 2026 shows Prime at 7%. That is a snapshot of one date, not a forecast, and Prime will have moved by the time you read a quote.
For a borrower, the practical point is the same as with any index. Prime is the part of your rate that moves, and your spread is the part that is negotiated and stays put.
Loan rate = Prime + Spread
Where to find the current Prime Rate
The Wall Street Journal publishes its Prime Rate daily, and the Federal Reserve reports the bank prime loan rate in its H.15 Selected Interest Rates release. Your loan documents will name which source applies.
Prime Rate history
Prime has covered a wide range. It reached an all-time high of 21.50% on December 19, 1980. It sat at 3.25% from the 2008 financial crisis, with the cut to that level on December 16, 2008, and again after the March 16, 2020 cut. It rose to 8.50% on July 27, 2023, after a run of increases that began in 2022, and stayed there into 2024 before easing.
The lesson for a business borrower is not any single number. A variable loan taken out when Prime was 3.25% and one taken out at 8.50% carry the same spread but very different payments. Underwrite your cash flow at a higher Prime than today's.
Worked example: Prime plus a spread on a $1,400,000 loan
Take the $1,400,000 loan on a $2,000,000 purchase that we use across this site. This example is an owner-occupied building financed with a variable-rate SBA 7(a) loan priced at Prime + 2.75%, a 25-year term and monthly payments. The spread is under the 7(a) maximum of Prime + 3% for loans over $350,000. These are illustrative numbers, not a quote, and they leave out the SBA guarantee fee and closing costs.
| Prime | Loan rate (Prime + 2.75%) | Monthly payment | Change vs. start |
|---|---|---|---|
| 6.00% (down 1 point) | 8.75% | $11,510 | −$966 |
| 7.00% (start) | 9.75% | $12,476 | — |
| 7.25% (up 0.25) | 10.00% | $12,722 | +$246 |
| 8.00% (up 1 point) | 10.75% | $13,469 | +$993 |
| 9.00% (up 2 points) | 11.75% | $14,487 | +$2,011 |
The figures come from the same payment formula as our SBA 7(a) calculator. A one-point rise in Prime adds about $11,920 a year in debt service on this loan, and a 0.25-point change moves the payment by about $246 a month.
A line of credit works differently
On a revolving line, you pay interest only on the balance you have drawn. Suppose a bank line is priced at Prime + 1.75%. With Prime at 7.00%, the rate is 8.75%, and a fully drawn $200,000 balance costs $200,000 × 8.75% ÷ 12 = $1,458 a month in interest. If Prime rises to 8.00%, the same balance costs $1,625 a month, which is $167 more. If you carry only $50,000, the same rise costs about $42 a month. The rate risk follows the balance you carry.
Who uses Prime
- SBA 7(a) loans. The SBA's base rate for a variable 7(a) loan is the Prime Rate in effect on the first business day of the month, as printed in a national financial newspaper. The first change can occur on the first day of the month after the initial disbursement, and after that the rate can change no more often than monthly (13 CFR 120.214). Since March 1, 2026, lenders may also use SOFR or the 5- or 10-year Treasury as the base rate, but the maximum rate is still measured from Prime. See our SBA 7(a) loans page.
- Bank lines of credit. Bank lines are most often quoted as Prime plus a spread. As of September 2026, our ranges show bank business lines of credit at 8.75–11%. The structure is Prime + 1.75–4%. See business lines of credit.
- Bank term loans. Many variable-rate term loans use Prime as the index. Our bank term loan range is 7.5–11%, built from Prime + 0.5–4%. See business term loans.
- Some commercial real estate and equipment loans with a variable rate, and practice acquisition loans from banks and SBA lenders.
The full table is on our commercial real estate rates page.
Prime vs. the federal funds rate vs. SOFR
| Rate | Who sets it | How often it changes | Typical use |
|---|---|---|---|
| Federal funds target range | Federal Open Market Committee | At FOMC decisions | Policy rate; Prime is built from it |
| Prime Rate | Banks, following the Fed | When banks follow a Fed change, usually within a day | Lines of credit, SBA 7(a), bank term loans |
| SOFR | Calculated by the New York Fed from Treasury repo transactions | Every business day | Bridge and construction loans, some agency floating loans |
| Treasury yields | The market | Continuously | Fixed-rate loan pricing |
The difference matters when you compare quotes. A bank quoting Prime + 1.75% and a debt fund quoting SOFR + 3.50% cannot be compared by spread alone. Convert both to an all-in rate at today's index levels, and then compare how each would behave if rates rise. Our guide to Prime vs. SOFR goes through the two side by side, and the entry on fixed vs. floating rate covers when to lock instead.
Prime Rate vs. APR
Prime is an index. The APR is the all-in annual cost of a particular loan. A loan at Prime + 2.75% has a note rate of 9.75% when Prime is 7.00%, but its APR also reflects fees, such as the SBA guarantee fee and origination points, so it is higher. When you compare two loans, compare the APR as well as the note rate.
Why lenders care
For a bank, Prime is the pricing floor for the business book. The lender's cost of funds moves with the Fed, and Prime passes that through to borrowers automatically. The spread then pays for credit risk, the collateral, the term and the lender's margin. That is why a strong borrower with real estate collateral gets a lower spread over the same Prime than a young business with a weaker credit profile.
Lenders also underwrite the possibility that Prime rises. Many size a variable-rate loan using a stressed payment, so a property or business that clears a 1.25x DSCR at 9.75% may not clear it at 11.75%. On our example, the payment grows from $12,476 to $14,487 a month at that level, an increase of about $24,000 a year. If cash flow cannot absorb that, the lender may reduce the loan amount, ask for a lower-risk structure, or price the loan higher. Some lenders also write a rate floor into the note, which keeps your rate from falling below a set level even when Prime drops.
What to watch for and how to negotiate
- Know which Prime. The loan documents should name the published Prime Rate, such as the Wall Street Journal Prime, and say what applies if that publication stops reporting it.
- Compare spreads, not just rates. The spread is what you negotiate. Prime is effectively the same at the large banks, so a quote of Prime + 2.25% beats Prime + 2.75% on the same date.
- Check the floor. A floor near today's rate means you give up part of a variable loan's main advantage, which is that payments fall when Prime falls.
- Check when the rate adjusts. It may reset monthly, quarterly or at each billing cycle. On an SBA 7(a) loan, the first change can occur on the first day of the month after the first disbursement.
- Know the SBA ceiling. For 7(a) variable loans, the maximum is Prime + 3% over $350,000, Prime + 4.5% for $250,001–$350,000, Prime + 6% for $50,001–$250,000 and Prime + 6.5% for $50,000 or less. A quote above your tier's limit is a red flag.
- Stress-test the payment. Run your cash flow at Prime plus 2 points and see whether the business or property still covers its debt service.
- Weigh fixed against variable. If the loan will be held for many years and your budget cannot take a 2-point swing, a fixed rate may be worth its higher starting rate. If you expect to refinance or sell within a few years, variable often costs less.
Common mistakes
- Treating today's Prime as permanent. A plan that holds Prime flat for 25 years is a bet on rates.
- Confusing the Prime Rate with your rate. Your rate is Prime plus a spread, and the spread can be several points.
- Comparing a Prime quote with a SOFR quote by spread. They sit on different indexes that move on different schedules.
- Ignoring the floor and the reset schedule. They decide how much of a rate decline you actually keep, and how quickly an increase reaches your payment.
- Forgetting fees. The note rate is not the whole cost. Compare APR.
If you are comparing a variable-rate quote with a fixed one, send us the property and the business plan and we will line up the quotes on the same terms.
Sources: Federal Reserve Board, H.15 Selected Interest Rates (bank prime loan rate definition) and FOMC implementation note and statement of September 16, 2026 (federal funds target range 3.75%–4.00%); Wall Street Journal Prime Rate definition; 13 CFR 120.214, variable interest rates for SBA 7(a) loans (base rate, adjustment timing and maximum spreads); SBA Procedural Notice 5000-875051 and Federal Register, Feb. 10, 2026, on alternative 7(a) base rates; historical Prime Rate data from JPMorgan Chase's historical prime rate table and FRED series DPRIME (Federal Reserve Bank of St. Louis). Payments are calculated with the BestLoanUSA SBA 7(a) calculator formula and simple interest arithmetic. Rates and spreads in the example are illustrative.
Frequently asked
What is the Prime Rate?
The Prime Rate is the interest rate U.S. banks post as the base rate for their most creditworthy business customers. The Wall Street Journal publishes a consensus figure, defined as the base rate on corporate loans posted by at least 70% of the 10 largest U.S. banks, and the Federal Reserve reports a bank prime loan rate in its H.15 release. Lenders use it as the starting point for variable-rate loans, such as Prime plus 2.75%.
How is the Prime Rate related to the federal funds rate?
Banks set Prime at 3 percentage points above the upper limit of the Federal Reserve's federal funds target range. When the Federal Open Market Committee raises or lowers the target by 0.25 point, banks move Prime by the same amount, usually within a day. If the top of the range is 4.00%, Prime is 7.00%.
Does a change in the Prime Rate change my loan payment?
On a variable-rate loan, yes. Your rate is Prime plus a fixed spread, so when Prime moves, your rate moves by the same amount. How soon the new rate applies depends on the loan documents. An SBA 7(a) variable rate can change no more often than monthly, while a line of credit may reprice at the next billing cycle. A fixed-rate loan does not change.
What does Prime plus 2% mean?
It means your interest rate is the Prime Rate plus 2 percentage points. If Prime is 7.00%, the rate is 9.00%. The 2 points are the spread, which the lender sets from your credit, collateral and loan type. The spread stays the same while the index changes, so if Prime rises to 8.00%, the rate becomes 10.00%.
Is the Prime Rate the same as the rate I will pay?
No. Prime is the rate for the banks' lowest-risk borrowers. Most business borrowers pay Prime plus a spread, and some loans carry a floor, a minimum rate that applies even if Prime falls. For SBA 7(a) variable loans, the spread cannot exceed Prime + 3% on loans over $350,000, with higher allowed margins on smaller loans.
What is the difference between Prime and SOFR?
Prime is a bank-posted rate that changes only when banks change it, usually right after a Federal Reserve rate decision. SOFR is calculated from Treasury repo transactions and changes every business day. Business lines of credit and SBA 7(a) variable loans are usually priced off Prime. Bridge and construction loans are usually priced off SOFR.