Spread (Loan Margin)
Spread (Loan Margin), in short
A loan spread, also called the margin, is the fixed markup a lender adds to a benchmark index such as SOFR, Prime or a Treasury yield to set your rate. SOFR + 275 basis points means SOFR plus 2.75%. On a $1,400,000 loan amortized over 25 years, every 0.50 point of spread adds roughly $435 to $445 to the monthly payment.
Also called loan margincredit spreadinterest rate spreadmargin over indexbasis points over index
How a spread works
Almost every commercial loan rate has two parts: a benchmark that the market sets and a spread that the lender sets for your deal.
Interest rate = Benchmark index + Spread
The benchmark depends on the loan. Floating-rate bridge and construction loans are usually priced off SOFR, the Secured Overnight Financing Rate published by the New York Fed. Bank term loans, lines of credit and the variable option on SBA 7(a) loans are more often priced off Prime. Fixed-rate loans are typically quoted as a spread over a Treasury yield of similar maturity, such as the 5-year Treasury for a 5-year bank loan or the 10-year Treasury for a 10-year CMBS or life company loan, and then locked. Our guide to Prime vs. SOFR explains the two floating benchmarks.
Spreads are quoted in basis points. One basis point is 0.01%, and 100 basis points is one percentage point. “S + 275” means SOFR plus 2.75%. If SOFR is 3.88%, the rate is 6.63%.
On a floating-rate loan, the index resets on a schedule in the loan documents and the spread does not, so the spread is the one component of your rate that you can negotiate and that stays the same while the market moves. On a fixed-rate loan, the benchmark is read on the day of the rate lock, and the spread plus that benchmark becomes the rate for the fixed period. Our entry on fixed vs. floating rates covers which structure fits which hold period.
To back a spread out of a quote, subtract the index: a 6.63% rate on SOFR at 3.88% is a 2.75-point spread. Spreads can also be negative; a rate of Prime minus 0.50% has a spread of −50 basis points.
What the spread pays for
The index is the lender's baseline cost of money. The spread is everything on top of it:
- Credit and collateral risk. A loan with higher leverage, a thinner DSCR, a transitional property or a first-time sponsor carries more risk of loss, and the spread rises to compensate.
- The lender's own funding and operating costs. A bank funds loans with deposits, a debt fund borrows against its loans, and a CMBS conduit sells the loan into a bond. Each has a different cost and so a different spread.
- Expected profit and competition. When many lenders compete for the same stabilized deal, spreads compress. When capital is scarce, they widen, even if the index has not moved.
The all-in rate also moves for reasons that have nothing to do with you. If market spreads widen, a fixed-rate quote can go up even if the Treasury yield is unchanged, because the lender or bond buyer asks for more compensation for risk. That is why fixed-rate quotes are not final until you lock.
Worked example: what 50 basis points costs
Take the $1,400,000 loan on a $2,000,000 purchase used throughout this site, a floating rate with SOFR at 3.88% and a 25-year amortization. Three lenders quote different spreads. These are illustrative numbers, not a quote.
| Lender | Spread | Rate (SOFR 3.88%) | Monthly payment | Annual payment |
|---|---|---|---|---|
| A | S + 225 bps | 6.13% | $9,132 | $109,582 |
| B | S + 275 bps | 6.63% | $9,567 | $114,803 |
| C | S + 325 bps | 7.13% | $10,011 | $120,136 |
The payments come from the same amortization formula as our commercial mortgage calculator. Each 50 basis points of spread adds about $435 to $445 a month, or roughly $5,200 to $5,300 a year. Between the best and worst quote the gap is $879 a month, about $10,500 a year.
The spread also reaches the loan size. At a 1.25x minimum DSCR, the property needs net operating income of about $136,978 to support lender A's payment ($109,582 × 1.25) and $143,504 for lender B's ($114,803 × 1.25). A property that earns $140,000 clears the test at the first quote and fails it at the second, so a higher spread can shrink proceeds, not just raise your cost.
If the same loan is interest-only, each 50 basis points costs $1,400,000 × 0.50% = $7,000 a year, or about $583 a month. A one-point rise in SOFR would cost $14,000 a year on that loan, the same as 100 basis points of extra spread. The difference is that you can negotiate the spread before closing, and you cannot negotiate the index.
Where spreads show up by product
As of September 2026, our rate ranges express most index-priced programs as a benchmark plus a spread band. These are the bands, not quotes:
- Bridge loans: SOFR + 2.25–3.25% at banks and SOFR + 2.75–4.25% at debt funds.
- Construction loans: SOFR + 2.75–4% at banks and SOFR + 2.75–6.5% across bank-to-debt-fund lenders.
- CMBS: 10-yr Treasury + 1.75–2.75%. Permanent financing from banks: 5-yr Treasury + 1.5–3%.
- SBA 7(a) variable: Prime + 1.5–4.5% is the typical band across loan sizes; the legal maximum depends on loan size (see below).
The full table, with the benchmarks behind it, is on our commercial real estate rates page.
Spread vs. related terms
- Spread vs. APR. The spread is only the markup over the index. APR adds the effect of fees, such as an origination fee, so two loans with identical spreads can have different true costs.
- Spread vs. index. The index is the market benchmark; the spread is your lender’s price on top of it. Ask which one a quote changes when someone says “the rate went down.”
- Spread vs. floor. A floor is a minimum on the index (or the rate). If your loan has a SOFR floor of 1.00% and SOFR falls to 0.50%, your rate is calculated on 1.00% plus the spread.
- Credit spread vs. loan spread. In the bond market, “spread” also describes the extra yield investors demand over a benchmark.
What can change a spread after closing
On most fixed-rate loans the all-in rate is set at closing and nothing about it changes. On floating-rate loans the spread is normally constant, but the documents can move it in a few ways, so read for these before you sign:
- Extension step-ups. Bridge and construction loans can include extension options. The loan documents may require a higher spread, an extension fee, or both when you exercise one, because the loan is outstanding longer without the business plan finished.
- Performance triggers. Loan documents can lower the spread when the property hits an occupancy or DSCR target, or raise it if a test is missed.
- Default rate. Loan documents can add a default-rate increment on top of the contract rate after an event of default. It is a separate clause from the spread, but it is calculated on the same balance.
Why lenders care
For a lender, the spread is the income that pays for the risk. A lender prices a loan by weighing the loss it could take if the borrower defaulted against the income the loan earns: higher LTV, lower DSCR, a lower debt yield, a shorter operating history or weaker sponsor liquidity all push the spread up.
Spread is also negotiated against other terms. Lenders can trade it against prepayment protection, recourse, fees and extension options, so a lower spread on one quote may be paid for somewhere else in the term sheet. Compare quotes on the whole structure, not on the spread alone.
How to negotiate and compare spreads
- Ask which index and tenor the spread sits on. S + 275 on 30-day average SOFR and on Term SOFR are not the same loan, and a spread over Prime is not comparable to one over SOFR. Convert every quote to a rate at the same index level.
- Compare all-in cost, not just spread. Add origination and exit fees, rate cap cost, and any index floor before ranking quotes.
- Ask about step-ups. Check whether the spread rises when you exercise an extension, miss a debt-yield or DSCR test, or convert from interest-only to amortizing.
- Improve what the lender is pricing. More equity, stronger in-place income, better sponsor liquidity and a clear exit strategy are the usual ways to lower a quoted spread.
- Quote the same deal to several lenders. Spreads vary widely between a bank, a debt fund and a conduit for the same property, because each funds and prices risk differently.
- Remember that a lower spread can come with a lower loan amount. The cheapest spread is only the best quote if it funds what you need.
Spreads on SBA 7(a) loans
SBA 7(a) is the one place where the spread has a legal ceiling. For variable-rate loans, 13 CFR 120.214 caps the spread over the base rate by loan size: 6.5 points for $50,000 or less, 6.0 points for more than $50,000 up to $250,000, 4.5 points for more than $250,000 up to $350,000, and 3.0 points for loans above $350,000. Lenders may price below the cap, and larger loans have lower caps, so the same borrower can see a lower maximum spread simply by borrowing more. Check your quote against the cap for your loan size, and ask the lender which base rate the cap is measured from. For the program as a whole, see our SBA 7(a) vs. 504 guide.
Common mistakes
- Comparing only the starting rate. Two quotes with the same rate today but different indexes or floors can diverge once rates move.
- Treating the spread as the whole cost. Fees, cap costs, extension fees and prepayment terms are part of what you pay.
- Assuming the spread is always fixed. It may be, but extension and performance step-ups can be written into floating-rate loans, so read the documents.
- Confusing basis points with percent. 25 bps is 0.25%, not 25%. A quote of “S + 300” is SOFR plus 3.00%.
- Ignoring the maturity date. A cheap spread on a short loan can cost more once you refinance in a different market.
To see how lenders would price your property, send us the property and the business plan and we will compare quotes on the same terms.
Sources: 13 CFR §120.214, SBA variable interest rate maximums for 7(a) loans (law.cornell.edu); Federal Reserve Bank of New York, Secured Overnight Financing Rate data; BestLoanUSA rate ranges (benchmark plus spread, September 2026). Loan payments are calculated with the BestLoanUSA commercial mortgage formula. Rates and spreads in the example are illustrative.
Frequently asked
What is a spread on a loan?
The spread is the margin a lender adds to a benchmark rate to get your interest rate. On a floating-rate loan priced at SOFR plus 2.75%, the spread is 2.75 percentage points, or 275 basis points. The benchmark changes over time; the spread is written into the loan documents and normally stays the same for the term.
What is the difference between a spread and a margin?
On a loan, nothing meaningful. Lenders and loan documents use both words for the fixed amount added to the index. “Margin” is more common in adjustable-rate loan documents, and “spread” is more common in commercial real estate pricing quotes and term sheets. Always read which index the number is added to.
How many basis points is 1%?
One percentage point is 100 basis points, and one basis point is 0.01%. A spread of 275 basis points is 2.75%. Lenders quote in basis points so that small differences, such as 25 basis points, are not misread.
What is a good spread on a commercial real estate loan?
It depends on the product, the property and the borrower. As of September 2026, our rate ranges build bank bridge loans at SOFR + 2.25–3.25%, bridge debt funds at SOFR + 2.75–4.25% and CMBS loans at 10-yr Treasury + 1.75–2.75%. A lower spread than the range for your loan type usually reflects lower leverage, a stronger property and a stronger sponsor.
Can the spread change after closing?
Usually not during the initial term, but check the documents. Some floating-rate loans step the spread up when you exercise an extension option or if a performance test is missed. A fixed-rate loan has no ongoing spread because the all-in rate is locked at closing.
Is there a limit on the spread for SBA 7(a) loans?
Yes. For variable-rate SBA 7(a) loans, SBA rules cap the spread over the base rate by loan size: 6.5 points for loans of $50,000 or less, 6.0 points up to $250,000, 4.5 points up to $350,000 and 3.0 points above $350,000 (13 CFR 120.214). Lenders often price below the cap.