Commercial Real Estate Process

Rate Lock

Rate Lock, in short

A rate lock fixes your loan's rate, or its Treasury index or spread, until a closing deadline so a market move cannot change your payment. On a $1,400,000 loan, a rise from 6.50% to 7.00% before closing adds $5,304 a year in payments. Agency multifamily lenders offer early locks with a good faith deposit; other lenders set their own timing.

Also called interest rate lockrate lock agreementearly rate lockindex lock

How a rate lock works

A fixed-rate commercial loan is priced as a benchmark plus a spread. The benchmark is usually a U.S. Treasury yield with a maturity close to the loan term, and the lender adds a spread for your property, leverage and borrower. The benchmark moves every day, so a quote you receive in week one is only a statement of where the market is that day.

A rate lock stops that movement from reaching you. The lender agrees to hold a rate, or the formula that produces it, until a closing deadline. Three things are set in the lock agreement:

  • What is locked. The all-in rate, or only the Treasury index (an index lock), or only the spread on a floating-rate loan.
  • How long it lasts. A lock covers a window, such as 30, 60, 90 or 180 days, that must be long enough to reach closing.
  • What you put at risk. A good faith deposit, a fee, or both, and what happens to them if the loan does not close.

A lock is not the same as a quote or a term sheet. A quoted rate is not binding, and a lender can reprice it before commitment. Unless the lender has agreed in writing to hold the pricing, you do not have a lock. A lock is the written commitment.

When lenders allow a lock

Commercial lock timing is set by each lender, so ask early.

Lender typeWhen you can usually lockWhat to know
Fannie Mae / Freddie Mac multifamilyEarly, within days of application or preliminary underwritingLocks run up to 180 days at Fannie Mae and about 60 to 120 days to purchase at Freddie Mac; good faith deposit required
CMBS / conduit, banks, credit unions, life companiesSet by each lender: at application, at commitment, or close to closingAsk for the lock policy, the deadline and any deposit or fee in writing before you pay for third-party reports
SBA 504Debenture rate is set at sale, not at applicationThe bank's first mortgage is priced and locked separately with the bank

Our commercial real estate rates page shows the benchmarks and spread ranges that sit underneath these quotes.

Worked example: what a rate move costs before closing

Take the $2,000,000 purchase used throughout this site, with a $1,400,000 loan, a 25-year amortization and a 10-year term. The rates below are illustrative, not a quote. Payments come from the commercial mortgage calculator.

Rate at closingMonthly paymentAnnual paymentExtra per year vs. 6.50%
6.50% (locked)$9,453$113,435—
6.75%$9,673$116,073$2,638
7.00%$9,895$118,739$5,304

A 50-basis-point rise before closing costs $5,304 a year, or $53,040 over ten years of payments, and it does so on a loan you may have already committed to buying a building with.

Now see what it does to DSCR. If the property produces $170,000 of net operating income:

  • At 6.50%, DSCR = $170,000 ÷ $113,435 = 1.50x
  • At 6.75%, DSCR = $170,000 ÷ $116,073 = 1.46x
  • At 7.00%, DSCR = $170,000 ÷ $118,739 = 1.43x

At 1.50x the loan has comfortable room above a 1.25x minimum. If the lender had sized the loan right at 1.25x, the same 50-basis-point move would have cut the loan amount, not just the cushion, because the maximum payment the property can carry would be fixed while the rate rises. That is the practical reason to lock when a loan is sized tight.

The cost of the lock is the deposit. On this loan, a 2% good faith deposit, the base figure on Freddie Mac's early rate lock term sheet, is $28,000, and the 3% tier Fannie Mae uses for longer locks is $42,000. Those figures are cash you need available on the day you lock, and the lender holds them until closing.

Rate lock vs. index lock vs. float

  • Rate lock fixes the all-in rate. You know the payment.
  • Index lock fixes only the Treasury yield. Freddie Mac describes its index lock as locking the most volatile part of the coupon. The spread is not subject to market grid movement but can change if the loan terms, property or borrower change, so the final rate is not fully known until the spread is set.
  • Float leaves the rate open until the lender sets it. You keep the upside if yields fall and the full downside if they rise.

Floating-rate loans work differently. Their rate resets with an index such as SOFR, so the lock question there is different (Freddie Mac's floating-rate loan allows the spread to be locked), and the cost of limiting a rising index is an interest rate cap. For the larger choice between the two structures, see fixed vs. floating rate.

Why lenders care

When a lender locks your rate, the lender takes the interest-rate risk. If yields rise between the lock and closing, the lender or the bond buyer behind it has committed to a coupon that is already below market. That is why locks come with a good faith deposit: the lender wants security that you intend to close. Agency deposits step up with lock length, because a longer lock is a bigger risk to carry.

  • Fannie Mae locks run up to 180 days for a fixed-rate loan. Its Streamlined Rate Lock lets a lender lock the all-in rate shortly after application and up to 180 days before closing, with a good faith deposit of 2% for locks up to 90 days and 3% for 91 to 180 days. The Guide's Good Faith Deposits section sets the minimums.
  • Freddie Mac Optigo lenders can lock a fixed rate (or the spread on a floating-rate loan) within days of preliminary underwriting. Its early rate lock term sheet shows a good faith deposit of 2% of the loan amount, retained by the Optigo lender and adjusted for longer locks.

Lenders also underwrite the closing timeline. A loan that stalls on an appraisal, environmental report or title issue can outlast its lock, and then the lender is not bound to the old rate.

Lock or float: a short checklist

  • Lock if the loan is sized near the lender's minimum DSCR, if your equity is fixed and a smaller loan would break the deal, or if the closing date is firm.
  • Consider floating only if you have room in the DSCR and the cash to absorb a higher rate, and the lender has told you what it will do if the rate moves against you.
  • Either way, put the closing timeline on paper first. A lock that expires before closing protects nothing.

What to watch for

  • Ask when the lender will lock before you pay for reports. The answer changes your risk. A lender that will not lock until commitment leaves you exposed through appraisal and underwriting.
  • Know whether the deposit is refundable. Ask whether it is credited at closing. If you walk away, the lender may keep all or part of it, so read the terms before you wire funds.
  • Match the lock to the real timeline. Count the days for appraisal, environmental, survey, title, legal and lender approvals. A lock shorter than the timeline is a lock you may lose.
  • Get extension terms in writing. If a delay is not your fault, you want to know what an extension costs and who decides.
  • Lock the right thing. An index lock leaves the spread open. Confirm what changes the spread, such as a change in loan terms or the borrower.
  • Know that a lock does not change your other costs. Prepayment terms such as yield maintenance or defeasance and the origination fee are negotiated separately.
  • Check that your cash covers the deposit and the closing costs. A lock that ties up cash needed elsewhere can be a problem on its own.

When you have a deal in hand, send us the loan details and we will tell you which lenders for your property type allow an early lock and what they ask for. For a deeper look at how rate moves affect a refinance decision, see our guide to when commercial refinancing makes sense.

Sources: Fannie Mae Multifamily Selling and Servicing Guide, Rate Lock and Committing and Good Faith Deposits (mfguide.fanniemae.com); Fannie Mae Streamlined Rate Lock term sheet (multifamily.fanniemae.com); Freddie Mac Optigo fixed-rate loan term sheet and index lock term sheet (mf.freddiemac.com); CDC lender descriptions of SBA 504 debenture pricing. Payment figures are computed with the site's commercial mortgage calculator at the stated assumptions.

Frequently asked

What is a rate lock on a commercial loan?

A rate lock is the lender's agreement to hold your interest rate, or the pricing formula that produces it, until a stated closing deadline. If Treasury yields or spreads rise after the lock, your rate does not. If the loan does not close by the deadline, the lock expires and the lender reprices at market.

Can you lock a rate on a commercial real estate loan?

It depends on the lender. Fannie Mae and Freddie Mac multifamily lenders offer early locks shortly after application or preliminary underwriting. Other lenders set their own policy, so ask when each one will lock. SBA 504 debenture rates are set when the debenture is sold, not at application.

How much does a rate lock cost?

On agency multifamily loans it is a good faith deposit rather than a fee. Fannie Mae's Streamlined Rate Lock term sheet shows 2% for locks up to 90 days and 3% for 91 to 180 days, and Freddie Mac's early rate lock term sheet shows a 2% deposit held by the Optigo lender, adjusted for longer locks. Other lenders set their own terms. Ask whether the deposit is credited at closing; a lender may keep it if you walk away.

What is the difference between a rate lock and an index lock?

A rate lock fixes the all-in rate. An index lock fixes only the benchmark, usually a Treasury yield, and the lender's spread can still change if the loan terms, property or borrower change before closing. Freddie Mac offers an index lock on fixed-rate loans, which protects the part of the rate that moves daily.

What happens if my rate lock expires before closing?

The lender can reprice the loan at market rates, or charge to extend the lock if the lender allows extensions. A longer closing timeline is the usual cause: a slow appraisal, environmental report or title issue. Ask for the extension terms before you lock, not after the deadline passes.

Is it better to lock or float?

Locking gives you a payment you can underwrite and protects a thin debt service coverage ratio. Floating can save money if rates fall, but it leaves your loan size exposed if they rise. If the loan was sized close to the lender's minimum DSCR, a rate increase can cut your proceeds, which is a reason to lock.

Articles that use this term

Related terms