Interest Rate Cap
Interest Rate Cap, in short
An interest rate cap is a contract, bought for a one-time premium, that pays you when a floating index such as SOFR rises above a set strike rate. On a $1,400,000 loan at SOFR + 2.75% with a 5.25% strike, your rate cannot effectively exceed 8.00%, because the cap pays the difference above the strike. Lenders often require one so the property can still cover its debt service if rates rise.
Also called rate capinterest rate cap agreementSOFR capcap strike rate
How an interest rate cap works
A floating-rate loan has two moving parts: an index, usually SOFR, and a fixed spread. The index can rise, and on an interest-only loan every point of increase flows straight into the monthly payment. An interest rate cap is a separate contract that protects against that. The borrower buys it from a cap provider, usually a bank, for a one-time premium.
A cap has four terms, and all four matter:
- Index: the rate the cap is measured against, which should match the loan's index (for example, the same version of SOFR).
- Strike rate: the index level above which the cap pays.
- Notional amount: the principal the payments are calculated on, normally the loan amount.
- Term: how long the cap lasts, which lenders usually want to match the loan term.
Each period, when the index is above the strike, the provider pays the borrower the difference on the notional amount. The borrower keeps paying the loan interest in full, so the cap does not lower the loan's rate. It sends back the money that the higher index would have cost.
Cap payment = (Index − Strike) × Notional ÷ 12, paid only when the index is above the strike
Effective maximum rate = Strike + Spread (before the premium)
These formulas are simplified. Actual cap payments follow the day count and reset schedule in the cap confirmation.
The strike applies to the index, not to the all-in rate. A 5.25% strike on a loan priced at SOFR + 2.75% means your effective rate cannot exceed 8.00%. That is the strike plus the spread.
Worked example: a cap on a $1,400,000 loan
Use the $1,400,000 loan on a $2,000,000 purchase that we use across this site. It is a floating-rate bridge loan, interest-only, priced at SOFR + 2.75%. SOFR is 3.88% at the time of the quote, which gives a starting rate of 6.63% and an interest-only payment of $7,735 a month ($1,400,000 × 6.63% ÷ 12). Suppose the lender requires a cap with a 5.25% strike. All numbers are illustrations, not a quote.
| SOFR | Loan rate (SOFR + 2.75%) | Monthly interest | Cap pays | Net monthly cost |
|---|---|---|---|---|
| 3.88% (start) | 6.63% | $7,735 | $0 | $7,735 |
| 5.25% (at the strike) | 8.00% | $9,333 | $0 | $9,333 |
| 6.25% (1 point above) | 9.00% | $10,500 | $1,167 | $9,333 |
| 7.25% (2 points above) | 10.00% | $11,667 | $2,333 | $9,333 |
Above the strike, the net cost stops at $9,333 a month, which is $1,400,000 × 8.00% ÷ 12. Below the strike, you pay the market rate and keep the benefit of any decline. The cap pays $1,167 a month for each point the index is above the strike on this notional ($1,400,000 × 1% ÷ 12).
Where the strike comes from
The strike is rarely a free choice. Some lenders set it from the property's cash flow: the highest strike that still lets the property meet their minimum debt service coverage ratio at the capped rate. Say the property's net operating income is $140,000 and the lender requires 1.25x. The most debt service the lender will accept is $140,000 ÷ 1.25 = $112,000 a year. On a $1,400,000 interest-only loan, that is an 8.00% rate, and subtracting the 2.75% spread gives a 5.25% strike. At the starting 6.63%, annual interest is $92,820 and DSCR is 1.51x. At the capped 8.00%, DSCR is exactly 1.25x. The cap is what keeps the loan from falling below 1.25x if SOFR rises. This is one example of how a strike can be derived; other lenders set it by other rules, so ask for yours.
Fannie Mae's Multifamily Guide takes a similar approach for its Structured ARM loans: the cap strike rate plus the loan's margin components cannot exceed the rate that produces the minimum required underwritten DSCR for the loan's tier.
The premium
The premium is the real cost of the cap. It is paid up front, usually at closing, and does not come back if rates never reach the strike. It rises with the notional amount, the term and the market's expected volatility, and it falls as the strike goes higher. To show the arithmetic only, assume a premium of 1% of the notional amount: $14,000 on $1,400,000. This is illustrative only, not a typical or quoted price. That is a cost you pay at closing, and it does not come back if rates never reach the strike, so add it to your all-in cost with the origination fee, exit fee and any index floor. Actual premiums change daily with the rate market, so get a written quote.
Cap vs. swap vs. collar
| Tool | What it does | Upfront cost | If rates fall |
|---|---|---|---|
| Interest rate cap | Sets a ceiling on the index | One-time premium | You benefit fully (down to any floor) |
| Interest rate swap | Exchanges floating for fixed for the swap term | No premium in the same sense; termination cost on early exit | You do not benefit; you keep paying the fixed rate |
| Collar | A cap plus a floor you sell | Reduced, sometimes close to zero | You benefit only down to the floor |
A cap is the usual requirement on bridge and transitional loans because it limits the downside without fixing the rate, and these loans are usually repaid or refinanced within a few years. A swap makes more sense when the borrower expects to hold the loan for the full term and wants a predictable payment. In effect, it turns the loan into a fixed-rate loan. Our entry on fixed vs. floating rate covers that choice, and our guide to bridge loan costs shows where a cap fits into the all-in price.
Why lenders care
A lender sizes a floating-rate loan on what the property can pay when the rate is high, not only on today's rate. The cap is how it limits that risk. Without a cap, a rise in SOFR could push a transitional property below break-even, and the lender would be exposed on a loan secured by a building that is still being leased up or renovated. With a cap in place, the worst-case payment is known when the loan is underwritten, and that worst-case payment is the one used for sizing.
Lenders also care about who sits on the other side of the contract. They typically require the cap provider to meet a minimum credit rating set in the loan documents, and often require that the cap be assigned or pledged to the lender as collateral. The borrower is still the buyer and carries the cost. These requirements are written in the loan documents, so read them before you commit.
Some loans use a "springing" requirement: no cap at closing, but one is required if the index rises above a trigger level or if the borrower exercises an extension option. In that case the cost can arrive at the worst time, when rates are already high and caps are expensive.
What to watch for and how to negotiate
- Know the strike before you sign. Ask for it in the term sheet. A lower strike protects you more and costs more.
- Match the term. A cap that ends before the loan matures leaves you unhedged. If the loan has extension options, ask what the cap must be on the extended term and who pays.
- Add the premium to the all-in cost. Compare quotes on rate, fees, exit fee, floor and cap together. A lower spread can come with a more expensive cap.
- Shop the cap. If the lender allows you to buy the cap from any approved provider, get more than one quote. If the lender requires its own provider, ask what it charges.
- Check the reserve. Some loans require a cap replacement reserve if the cap expires before the loan does. Ask whether it is held and when it is released.
- Match the index. The cap should reference the same index and reset schedule as the loan, or part of the rise will not be offset.
- Plan the exit. The cap protects the term, not the refinance. When the loan reaches its maturity date, the market rate at that time sets your new payment.
- Know what the cap is worth at payoff. If you repay early, a cap with remaining term may have some value. Ask whether it can be sold back or must be assigned.
Common mistakes
- Reading the strike as the maximum loan rate. The strike caps the index. Your loan rate can still reach the strike plus the spread, which is 8.00% in our example.
- Ignoring the premium. It is a real cost paid once, and it counts against the return on a short-hold deal.
- Letting the cap expire first. Extension options are where this goes wrong.
- Assuming the cap lowers the rate. It only pays when the index is above the strike. Below it, you pay the full floating rate.
- Buying a cap only to satisfy the lender. Run the numbers on your own: compute DSCR at the strike rate and see whether the property still works. If it does not, the deal is too thin at that leverage.
Where caps show up
Caps are most common on bridge loans and construction loans, where the rate floats and the loan is interest-only, and on other floating-rate transitional financing. A commercial bridge loan from a debt fund often requires one; our commercial real estate rates page shows the SOFR-based ranges for these loans. Fixed-rate loans do not need a cap, because the rate is locked. If you are weighing a floating quote with a cap against a fixed quote, send us the property and the plan and we will line the two up on the same terms. You can also test your payment at different rates with the commercial mortgage calculator.
Sources: Fannie Mae Multifamily Guide, Part 1105, "Determining the Cap Strike Rate" and Structured Adjustable Rate Mortgage (SARM) Loans (mfguide.fanniemae.com); Chatham Financial, "Springing" Interest Rate Cap Requirements in CRE Loans. Payments are simple interest-only arithmetic (loan × rate ÷ 12) and a debt service coverage ratio of NOI ÷ annual debt service; rates, NOI and premium in the example are illustrative.
Frequently asked
What is an interest rate cap?
An interest rate cap is a contract that limits the cost of a floating-rate loan. The borrower pays a one-time premium to a cap provider. If the loan's index, usually SOFR, rises above the cap's strike rate, the provider pays the borrower the difference on the notional amount. The loan itself is unchanged, but the payments from the cap offset the extra interest.
What is a strike rate?
The strike rate is the index level at which the cap starts to pay. With a 5.25% strike, nothing is paid while SOFR is at or below 5.25%. When SOFR is 6.25%, the cap pays the borrower the 1.00% difference on the notional amount. The strike applies to the index only, so your effective maximum rate is the strike plus your loan spread.
Why do lenders require an interest rate cap?
A floating-rate loan is usually interest-only, so a rise in the index goes straight into the payment. A cap sets a ceiling on that increase, which lets the lender be confident the property can still cover its debt service. One common method is to choose the strike so that the loan still meets the lender's minimum debt service coverage ratio at the capped rate.
How much does an interest rate cap cost?
The premium is paid once, usually at closing. It depends on the notional amount, the strike rate, the length of the term and how volatile the market expects rates to be. A lower strike, a longer term and a larger notional all cost more. Because it varies with market conditions, get a quote from a cap provider rather than relying on a rule of thumb.
What is the difference between an interest rate cap and a swap?
A cap sets a ceiling but lets you keep the benefit if rates fall, and you pay for it with an upfront premium. A swap converts the floating rate to a fixed rate for the swap term, so you give up both the risk and the benefit of lower rates. A swap has no upfront premium in the same sense, but it can carry a termination cost if you exit early.
Does a cap still matter if my loan has a short term?
Yes, and it should match the loan term. A cap that expires before the loan matures leaves the rest of the term unhedged. If your loan has extension options, ask whether the cap must be extended or replaced when you extend, and who pays for it.