Application & Qualification Guide

How Long Does a Commercial Real Estate Loan Take to Close?

Typical closing times by CRE loan type, the appraisal, environmental, flood and SBA steps that set the pace, and what a faster close costs.

By BestLoanUSA Updated 7 min read

A commercial real estate loan does not close on the lender’s approval alone. It closes when the last required item is in the file: the appraisal, the environmental report, title, insurance and, for SBA loans, the agency’s own steps. The loan type sets the range; those items set where in the range your loan lands.

This guide covers typical closing times by loan type, the items that can decide the date, and what it costs to close faster. If you are still choosing a loan, the commercial real estate loan programs overview compares them side by side.

Typical Closing Times by Loan Type

Measured from a completed application to closing, these are the ranges we use across the site. They assume a complete file and a property without surprises.

Loan typeTypical time to closeWhat sets the pace
Hard money / fix and flip7–21 daysValuation and title; little income documentation
Bridge loans14–30 daysValuation, title, the lender’s review of the exit plan
DSCR loans21–35 daysAppraisal with rent analysis, title, insurance
Bank commercial mortgage30–45 daysFull underwriting, appraisal, environmental report
SBA 7(a)30–60 daysLender underwriting plus SBA eligibility and guaranty
SBA 50460–90 daysTwo approvals — the bank and the CDC — plus SBA
CMBS45–90 daysThird-party reports and the loan’s securitization terms
Construction45–90 daysPlans, budget and contractor review before the first draw

Two patterns stand out. Short-term lenders underwrite mainly the property and the exit, which is why their ranges are shorter. Government-guaranteed loans add steps of their own — SBA eligibility and guaranty, and for 504 loans a Certified Development Company’s approval. Speed and cost move in opposite directions; the example below puts a number on it.

What Actually Sets the Closing Date

The items below can hold up a closing. Several are fixed by federal rules, which is why a lender cannot simply skip them to meet your contract date.

1. The appraisal — and who ordered it

Federally regulated lenders need an appraisal by a state certified or licensed appraiser for commercial real estate loans unless an exemption applies. For a commercial real estate transaction of $500,000 or less, the bank may use an evaluation instead — a lighter valuation (12 CFR 34.43(a)(13) and (b), the Comptroller of the Currency’s rule; the FDIC and Federal Reserve have matching rules).

The appraiser must be engaged directly by the lender or its agent (12 CFR 34.45(b)(1)). An appraisal you ordered yourself does not meet that rule, so a regulated lender will order its own. A lender may accept one that another financial institution ordered, but only if it reviews it and finds it acceptable (12 CFR 34.45(b)(2)). So if a first lender declines and you move to a second one, ask early whether the second will accept the first lender’s appraisal — if not, the valuation starts over.

2. The environmental report and its 180-day clock

Your lender may require a Phase I environmental site assessment. For a buyer, it also matters legally: the federal “all appropriate inquiries” standard, which supports the buyer’s defenses against Superfund cleanup liability, must be conducted within one year before the acquisition, and its interviews, lien searches, government records review, site inspection and the environmental professional’s declaration must be conducted or updated within 180 days before it (40 CFR 312.20(a)–(b)). A report from an earlier, failed deal may still help, but if those parts are older than 180 days by your closing date, they have to be updated (40 CFR 312.20(c)). Order the report as soon as the contract is signed; if it recommends further testing, the date moves.

3. Flood zone, flood insurance and the notice

If any building securing the loan is in a FEMA special flood hazard area in a community where federal flood insurance is available, a national bank cannot make the loan unless the building is covered by flood insurance for the term of the loan (12 CFR 22.3(a)). The lender must also give you a written flood notice within a reasonable time before the loan closes (12 CFR 22.9(a), (c); the FDIC and Federal Reserve have matching rules). New National Flood Insurance Program policies normally take effect after a 30-day waiting period, but that waiting period does not apply when the policy is bought in connection with making the loan (42 U.S.C. 4013(c)) — so flood insurance does not have to delay closing, as long as the flood determination and the policy are ordered early.

4. Title, survey and entity documents

The lender needs a clean title commitment, and it may also require a survey. If the borrower is an LLC or corporation, it also needs formation documents, good-standing certificates and a resolution authorizing the loan. Each one that arrives late moves the date. Our loan document checklist lists what to gather before you apply.

5. SBA steps

On an SBA 7(a) loan, the loan must also meet SBA’s eligibility rules, which is part of why the range is longer. On an SBA 504 loan, both the bank and the CDC approve the project. The 504 purchase itself does not have to wait for the SBA-backed debenture: the project may use interim financing for every cost except the borrower’s contribution (13 CFR 120.890), and the debenture is issued later, after the interim lender certifies the amount disbursed and the CDC certifies the project is complete (13 CFR 120.891). The CDC is responsible for the 504 loan closing, and the debenture closing is the joint responsibility of the CDC and SBA (13 CFR 120.960). Our SBA 504 guide walks through the structure.

The Lender’s Decision Clock

Regulation B sets one deadline that applies to the lender. For a business with gross revenues of $1 million or less in its last fiscal year, the lender must tell you within 30 days after receiving a completed application whether it has approved, counteroffered or declined (12 CFR 1002.9(a)(1)(i) and (a)(3)(i)). For a larger business, the rule is notice “within a reasonable time” (12 CFR 1002.9(a)(3)(ii)). That deadline is for the decision, not the closing — and it starts only when the application is complete. Until the lender has everything it asked for, the clock has not started.

Example: What a Faster Close Costs

Example: An investor agrees to buy a $2,000,000 building with 30% down, borrowing $1,400,000. The seller wants to close in three weeks — inside the bridge range, but faster than the bank-loan range of 30–45 days. Using example rates (not quotes):

  • Bank loan: 7.0%, 25-year amortization, 10-year term — $9,895 a month. Over the first six months, $48,848 of the payments is interest.
  • Bridge loan, then refinance: 10% interest-only plus 2 points ($28,000), held six months, then refinanced into the same bank loan — $11,667 a month, or $70,000 of interest over six months.

Six months on the bridge costs about $49,152 more than closing the bank loan directly ($21,152 of extra interest plus $28,000 in points), before the second set of closing costs for the refinance — a new appraisal, title update and lender fees. On the bank loan, the balance would also have fallen by $10,522 in those months. If the faster close wins a building priced well below its value, that can be money well spent; if the seller would have accepted 45 days, it is not. The bridge loan cost guide covers when a bridge is the right tool, and you can rerun the bank-loan numbers in the commercial mortgage calculator.

How to Keep Your Closing on Schedule

  • Match the contract to the loan. Set the financing contingency from the lender’s closing range for your loan type, not from the seller’s preferred date. Ask for a longer due-diligence period on SBA loans.
  • Send a complete file. For a business with $1 million or less in revenue, the lender’s 30-day decision clock starts only with a completed application; incomplete files sit.
  • Order third-party reports on day one — appraisal (through the lender), Phase I, flood determination, title and survey — and ask for each expected date.
  • Get the commitment letter conditions in writing and work the list. Ask which conditions are needed before closing and which can follow.
  • Watch your rate lock expiration. If the closing slips past it, ask in advance what an extension costs.
  • Keep a fallback. If the property needs work or the seller’s date is fixed, compare a bridge loan with a contract extension before you commit.

BestLoanUSA works with 30+ lenders, charges $0 upfront fees and runs no hard credit pull to start. Start an application with your contract dates, and you get a decision within 48 hours.

💡 A commercial loan closes when the last report arrives, not when the lender says yes. Order the appraisal, environmental report and flood determination the day the contract is signed.

Sources: 12 CFR 34.43(a)(13) and (b) and 12 CFR 34.45(b) (appraisal thresholds, evaluations and appraiser engagement, Office of the Comptroller of the Currency); 40 CFR 312.20(a)–(c) (all appropriate inquiries, Environmental Protection Agency); 12 CFR 22.2, 22.3(a) and 22.9(a), (c) (flood insurance and notice, Office of the Comptroller of the Currency); 42 U.S.C. 4013(c) (NFIP waiting period and loan exception); 12 CFR 1002.9(a)(1) and (a)(3) (Regulation B notification); 13 CFR 120.890, 120.891 and 120.960 (SBA 504 interim financing and closing). Closing-time ranges are the site’s typical ranges for each loan type. Example figures computed with the site’s commercial mortgage calculator.

The bottom line

Before you sign a purchase contract, ask the lender for its closing time on your loan type and the date each third-party report will be ordered. Set your financing contingency from that answer, not from the seller’s preferred date. If you need speed, price it first: a short-term loan that closes the deal is a tool, but only when the refinance behind it is already realistic.

Run the numbers

Keep reading