Capital Stack
Capital Stack, in short
The capital stack is every source of money in a real estate deal, ranked by repayment priority. Senior debt is paid first and costs least; mezzanine debt, preferred equity and the sponsor's common equity follow, each taking more risk for a higher expected return. Losses hit the bottom layer first.
Also called capital structurecapitalization stackcap stackreal estate capital stack
How the capital stack works
Every commercial property is bought, built or refinanced with money from somewhere. Rarely does one source supply all of it. The capital stack is the list of those sources, drawn as a stack of layers with the first to be repaid at the top and the last to be repaid at the bottom.
The ordering matters because a property is not always worth what was paid for it. If the building sells for less than the total capital invested, the shortfall does not fall evenly across everyone. It lands on the lowest layer first, then the next one up, and only reaches the senior lender after everything beneath it is gone. That is why the layers carry different prices: a layer is paid for the loss it might absorb, not for the dollars it supplies.
Total capitalization = senior debt + mezzanine debt + preferred equity + common equity
Most deals use only two of the four layers. A buyer who puts $600,000 into a $2,000,000 purchase and borrows $1,400,000 has a two-layer stack: a 70% senior loan and 30% common equity. Larger or more heavily leveraged deals add layers between the two to reduce the cash the sponsor has to bring.
The four layers, top to bottom
1. Senior debt
The first mortgage (see senior debt). It is secured by a recorded lien on the property itself, so if the borrower defaults, the senior lender can foreclose, sell the property and recover its principal and interest before anyone else is paid. Bank, agency, CMBS, permanent and bridge loans are all senior debt when they hold the first lien. It is the largest and cheapest layer. On our bank CRE terms the loan-to-value runs 65–75% (80% multifamily), at about 6.5–8%.
2. Mezzanine debt
A loan that sits between the senior loan and the owner's equity. It is not secured by the real estate. Fannie Mae's Multifamily Guide, for example, defines it as subordinate debt to an owner of the borrower, secured by a pledge of the equity interest in the borrower and not by a lien on the property. After a default, the lender enforces against the pledged ownership interests instead of foreclosing on the building. Combined leverage with mezzanine runs 75–90% combined over a 2–7 yr term at about 11–16%. See mezzanine financing for how it is structured.
3. Preferred equity
Not a loan (see preferred equity). A preferred equity investor owns part of the borrowing entity and is entitled to a priority return before the common owners see a distribution. It does not appear as a mortgage lien and is not deductible interest, but it behaves like debt in practice: a fixed preferred return, a target repayment date, and remedies for missed payments that can include taking control of the entity. The comparison on our mezzanine page puts preferred returns at roughly 10–18%.
4. Common equity
The sponsor's own cash and any joint-venture partners' cash. It has no promised return and is repaid last, which also makes it the only layer that keeps the upside once everyone above it has been paid. Joint-venture equity targets are commonly quoted at 20–30%+ IRR, which is the price of sitting at the bottom. Whatever the sponsor does not borrow, the sponsor funds here.
Worked example: a $20,000,000 stack
These are illustrative assumptions, the same ones we use on our mezzanine page: a $20,000,000 purchase producing $1,400,000 of net operating income, a $13,000,000 senior loan at 6.5% interest-only, a $3,000,000 mezzanine loan at 12% interest-only, and $4,000,000 of common equity. Fees and closing costs are ignored.
| Layer | Amount | Share of $20M | Rate | Annual cost |
|---|---|---|---|---|
| Senior debt | $13,000,000 | 65% | 6.5% | $845,000 |
| Mezzanine debt | $3,000,000 | 15% | 12% | $360,000 |
| Common equity | $4,000,000 | 20% | residual | — |
| Total | $20,000,000 | 100% | $1,205,000 of interest |
Total interest is $1,205,000. Spread over the $16,000,000 of debt, that is a blended cost of debt of about 7.5%, and the property's $1,400,000 of NOI covers the interest 1.16 times. The senior lender sees a 65% loan-to-value and a 10.8% debt yield ($1,400,000 ÷ $13,000,000). The mezzanine lender sees something different: combined leverage of 80% and a debt yield of 8.75% ($1,400,000 ÷ $16,000,000), because its dollars sit behind the senior loan. That is why a lender evaluates its own attachment point, not just the headline LTV.
Who takes the loss if the value falls
Now suppose the property sells for less than $20,000,000, and ignore selling costs and interest. Proceeds go to the senior loan first, then mezzanine, then equity.
| Sale price | Senior ($13M) | Mezzanine ($3M) | Equity ($4M) |
|---|---|---|---|
| $20,000,000 | $13,000,000 | $3,000,000 | $4,000,000 (0% loss) |
| $18,000,000 | $13,000,000 | $3,000,000 | $2,000,000 (−50%) |
| $16,000,000 | $13,000,000 | $3,000,000 | $0 (−100%) |
| $14,000,000 | $13,000,000 | $1,000,000 (−67%) | $0 |
| $12,000,000 | $12,000,000 (−$1M) | $0 | $0 |
A 10% price drop takes half of the owner's equity. A 20% drop wipes it out entirely, and the mezzanine lender is paid in full at $16,000,000 and not a dollar more. The senior lender does not lose a dollar until the property sells for less than $13,000,000, a 35% decline. This is the whole logic of the stack in one table: equity gets the biggest upside and the first loss, and senior debt gets the smallest return and the most protection.
Compare the same deal without the mezzanine layer: $13,000,000 senior and $7,000,000 equity. A sale at $18,000,000 returns $5,000,000 to equity, a 29% loss instead of 50%. A $14,000,000 sale still returns $1,000,000. Mezzanine debt did not change the property's risk; it moved more of that risk onto a thinner equity layer, in exchange for a smaller cash contribution.
Capital stack vs. related terms
- Capital stack vs. LTV. LTV measures one loan against value. The stack shows every layer, so you can see combined leverage and where each layer attaches and detaches. A 65% senior loan with 15% mezzanine is a 65% LTV and an 80% combined LTV in the same deal. For construction and value-add, the layers are usually sized against cost: see loan-to-cost.
- Capital stack vs. stack position. The business-financing glossary also uses "stack position," but that describes merchant funders sharing the same bank deposits and is a separate concept. A CRE capital stack is ranked by liens, pledges and contract rights.
- Capital stack vs. a second mortgage. A second lien is debt secured by the same property, behind the first mortgage. Mezzanine debt is secured by the ownership interests above the property. Both are junior to the senior loan, but they are enforced differently.
Why lenders care about your stack
Another way to read the example stack is by attachment point, measured as a share of the purchase price: senior debt covers the first 65%, mezzanine the next 15% (65–80%) and common equity the last 20% (80–100%). Equity starts losing money as soon as value falls below 100%, mezzanine only below 80%, and the senior loan only below 65%.
A senior lender is not only underwriting the property. It is underwriting who else has a claim on it, because that determines what happens when the borrower runs into trouble.
- Combined leverage is tested, not just the first loan. Fannie Mae's guide calculates LTV by adding the mortgage, any pre-existing mortgage loans, hard-pay preferred equity and any mezzanine financing, then dividing by the property value. It calculates DSCR with the required mezzanine or hard-pay preferred payments included. The same logic applies wherever a senior lender counts debt behind its loan: a layer below the senior loan can still shrink what the senior lender will fund.
- Junior capital is often restricted or prohibited. Many senior loan documents bar additional liens, transfers of ownership interests and pledges of equity. Mezzanine and preferred equity both usually need senior lender consent, and a mezzanine loan generally requires an intercreditor agreement.
- The owner's skin in the game. The common equity layer is what makes the senior lender comfortable. Shrinking it with junior capital reduces the cushion and typically raises scrutiny of the sponsor, the exit and the exit strategy.
- Control after a default. A mezzanine lender that enforces on the pledged interests can become the new owner of the borrower, which a senior lender will want to approve in advance.
How a mezzanine lender enforces
Because mezzanine collateral is personal property (ownership interests) rather than real estate, enforcement is governed by Article 9 of the Uniform Commercial Code instead of state mortgage foreclosure law. Under UCC 9-610, a secured party may sell collateral after default, but every aspect of the sale, including the method, manner, time, place and terms, must be commercially reasonable, and UCC 9-611 requires reasonable authenticated notice before a disposition. Because it is a sale of ownership interests rather than a court foreclosure of the property, it can move on a different timeline than a senior foreclosure, which depends on the state and on whether it is judicial. Foreclosure rules differ by state; see our state guides. The senior lender protects itself through the intercreditor agreement, which commonly lets the senior lender require the mezzanine lender to cure all senior defaults and deliver a replacement guaranty before taking control, and gives the mezzanine lender cure rights over a senior default. That agreement is also where the borrower should read the standstill periods and the qualifications a new owner has to meet. The filing mechanics are the same as for any UCC filing.
What to watch for
- Ask for the senior lender's position on junior capital first. Before you approach a mezzanine or preferred equity source, read the senior term sheet for restrictions. A layer the senior lender will not allow is not an option.
- Price the blended cost, not each layer. A 12% mezzanine rate looks expensive until you see it blended with a 6.5% senior loan at about 7.5%. But the cost to your equity is higher than the blended rate: in the example, the extra $3,000,000 of 12% debt cuts cash flow after interest from $555,000 to $195,000 on a smaller equity base. Use the LTV calculator and the debt yield calculator to test each layer.
- Stress the bottom layer. Run the waterfall at a 10% and a 20% lower sale price. If your equity is gone at 20%, the stack has no margin for a soft market, a delayed lease-up or a refinance at a higher rate.
- Read every fee and trigger. Mezzanine lenders commonly charge origination and exit fees, and some ask for a share of profits at sale. Preferred equity can carry a minimum multiple or a change-of-control remedy if payments are missed. Those terms decide the real cost.
- Start the intercreditor early. It requires two lenders and two law firms to agree. Begin when the senior term sheet is signed, not after the appraisal is in.
- Plan the takeout of each layer. Short-term layers need an exit: a sale or a refinance into permanent financing. A maturity date that falls before the property stabilizes is the usual way a stack fails.
If you are planning a deal and want to see what the senior layer will carry before deciding whether you need anything below it, start a commercial real estate loan application and we will show you the senior loan options first. For background on how lenders size a first mortgage, read loan-to-value ratio explained.
Sources: Fannie Mae Multifamily Guide, “Mezzanine Financing” and “Calculating the DSCR and LTV” (mfguide.fanniemae.com); Uniform Commercial Code Article 9, §§ 9-610 and 9-611 (law.cornell.edu/ucc/9). Example figures are illustrative assumptions and ignore fees and closing costs; rates are example ranges, not quotes.
Frequently asked
What is a capital stack in real estate?
It is the full list of money paying for a property, stacked in order of repayment priority. Debt secured by the property sits at the top of the repayment line, mezzanine debt and preferred equity sit in the middle, and the owner's common equity sits at the bottom. If the property sells for less than was put into it, the bottom layer absorbs the loss first.
What are the four layers of the capital stack?
Senior debt, mezzanine debt, preferred equity and common equity. Senior debt is the first mortgage and is repaid first. Mezzanine debt is a loan secured by the ownership interests in the borrowing entity rather than by the building. Preferred equity is an investment that is paid a priority return ahead of the common owners. Common equity is the sponsor's and partners' cash, repaid last.
Why is the senior loan the cheapest layer?
Because it is the last layer to lose money. The property would have to fall in value by more than every layer beneath the senior loan before the senior lender took a dollar of loss, and the lender holds a recorded lien it can foreclose. Lenders price that cushion in, which is why each layer further down costs more.
What is the difference between mezzanine debt and preferred equity?
Mezzanine debt is a loan with a maturity date, secured by a pledge of the entity's ownership interests, and the lender can enforce by a Uniform Commercial Code sale of those interests after a default. Preferred equity is an ownership investment with a priority return and remedies written into the operating agreement, often a right to take control of the entity. Senior lenders often restrict both, so the senior loan documents decide which one is allowed.
What is an intercreditor agreement and why does it matter?
It is the contract between the senior lender and the mezzanine lender that sets who can do what after a default: cure rights, standstill periods, and the conditions for the mezzanine lender to take over the borrower. Senior lenders commonly require one before they allow mezzanine debt, and negotiating it is a common cause of delayed closings.